C
Costimated Cost Estimators
Prices checked: 2026-10-22 (5 verified sources)

Gravel Calculator

Determine cubic yards and tons of crushed stone, pea gravel, or decomposed granite needed for driveways and walkways.

Interactive Cost Engine

Gravel Calculator

1. Project Specifications

Range: 1–500 ft
ft

Length of area in feet

Range: 1–200 ft
ft

Width of area in feet

Range: 1–24 in
in

Compacted layer depth in inches (2-3" walkways, 4" driveways)

Single-trip hydraulic dump truck drop-off (Home Depot / local quarry benchmark)

2. Material Grade Selection

3. Regional Labor Market Tier

Please enter valid project dimensions above to calculate your estimate.

All dimensions must be positive numbers within physical boundary limits.

Calculation Formula & Engineering Rules

Our estimating engine calculates required volume or surface area from your project dimensions, applies verified unit material prices, adds trade-standard waste allowances, and adjusts labor, permit, and disposal components for regional economic variations:

Total Cost = Material Costs + [(Labor + Permits + Disposal) × Regional Multiplier]
Quantity Formula: Total Cost = (Quantity × Material Unit Cost) + [(Labor + Permit + Disposal) × Regional Multiplier (1.00×)]

Worked Estimating Example: Baseline Specification

Engine Baseline Output

Below is a fully itemized breakdown for a typical residential project configured with our default baseline dimensions ( 20 ft × 10 ft (3 in depth)) using standard national benchmark pricing in an average-cost US market:

Cost Component Category Amount ($) Share of Total
Crushed Stone / Dense Grade Aggregate (#57)
Angular crushed limestone or granite for driveway and shed sub-bases (approx. 1.4 tons per cu yd)
materials $88.80 60.0%
Professional Trade Labor
Wheelbarrow staging, raking, screeding, and plate compactor passes
labour $59.20 40.0%
Building Permit & Municipal Inspections
Residential landscaping gravel does not require structural permits
permit $0.00 0.0%
Debris Disposal & Haul-Away
Clean aggregate installation without significant haul-away debris
disposal $0.00 0.0%
Total Estimated Baseline Cost $148.00 100.0%
National Contractor Range (1.85 cu yd) $130 – $172 ( $80.00/cu yd & tons)

Material Grades & National Supplier Pricing

Unit material pricing sourced from verified national suppliers (Home Depot, Lowe's, and specialty regional building distributors) as of 2026-10-22:

Material Grade Unit Price Specification & Recommended Use Case
Crushed Stone / Dense Grade Aggregate (#57) $48.00 / cu_yd Angular crushed limestone or granite for driveway and shed sub-bases (approx. 1.4 tons per cu yd)
Pea Gravel (3/8" Rounded River Stones) $58.00 / cu_yd Smooth decorative stone for walking paths, patios, and dog runs (approx. 1.4 tons per cu yd)
Decomposed Granite (DG) $72.00 / cu_yd Fine-grade natural granite for firm, compacted garden pathways and patios (approx. 1.45 tons per cu yd)

DIY vs. Professional Contractor Installation

DIY Approach

Best suited for experienced homeowners with proper specialty tools. Saves direct professional labor costs (typically 40% to 55% of the total contractor invoice). Requires significant physical stamina, site preparation, safety gear, tool rental expenses, and material hauling logistics.

Hiring a Licensed Contractor

Recommended for structural integrity, code-compliant permitting, heavy demolition, and expedited completion. Professional contractors carry commercial general liability and workers' compensation insurance, provide manufacturer-backed workmanship warranties, and handle municipal building inspections.

Frequently Asked Questions About Gravel Calculator

How much does 1 cubic yard of gravel weigh in tons?

One cubic yard of crushed stone or pea gravel weighs approximately 1.35 to 1.4 tons (2,700 to 2,800 lbs). Decomposed granite is denser, averaging approximately 1.45 tons per cubic yard.

How thick should I spread gravel for a driveway vs a pathway?

Driveways require a minimum of 4 inches of compacted #57 crushed stone over commercial landscape fabric. Footpaths, patios, and dog runs typically need 2 to 3 inches of rounded pea gravel.

What is the difference between crushed stone (#57) and pea gravel?

Crushed stone features sharp angular edges that interlock under pressure, forming a firm surface for vehicles. Pea gravel consists of smooth, rounded river pebbles comfortable for walking barefoot but too unstable for vehicle parking.

How does bulk dump truck delivery work and what does it cost?

Quarries and home centers charge an $85 flat tailgate delivery fee for local dump truck delivery. Material is dumped directly onto your driveway or dedicated tarp staging zone.

Can I install gravel as a DIY project or do I need equipment?

Homeowners can easily wheelbarrow and rake up to 2 to 3 cubic yards DIY. For larger driveways over 10 cubic yards, renting a bobcat skid-steer and plate compactor saves days of manual labor.